RPT-D10K Battery Regeneration

Product Description

PRIME RPTD10K Universal Battery Discharge Tester and Analyzer

220VAC 10KW Digital Constant Discharging mixed technology with IGBT and Resistor and highfrequency pulse Maximum Limited Discharge Current Rates  Nominal Voltage 9V200V  50A 201V260V  100A 261V380V  150A 381V500V  200A and 501V1100V  100A It supports a monitoring data sheet to be printed after connecting by a USB between Discharger and PC Net Weight 421kgs Gross Weight  562kgsAirFreight 840 x 530 x 680 mm   RPTD10K can be communicated with a Computer connecting by the USB Serial Port USB Drive should be installed for the USB Serial Port before connecting with the discharger and computer When you press this PRINT Button the graph will be printed on the above sheet image

PC Monitoring for all working process  In order to see the depth of the data please install the SW and connect to your PC through USB port You can see all detailed processing data through monitor or print out After purchasing any PRIME product please download sw and manual 

If you dont have a discharger for 2V bank connected batteries please consider that RPTD10K discharger 12V96V discharge rate  max 200A will be the necessary equipment with PRIME RPTS500S600E400 regenerators 

The Usage of RPTD10K Discharger 12V96V  The operation will be very easy 56kgs 68x53x84cm

• Remove Capacity in the battery if any battery is charged prior to the regeneration process
• Check Battery Capacity up to a Cutoff voltage by constant current discharging find the exact battery capacity
• Compare Battery Capacity between before and after regeneration
• Remove floating voltage to check the real capacity
• If you discharge a battery for 35 minutes all floated voltage will be removed and it is a real battery voltage
• Check the weakest 2V battery in a bank when finishing the discharge process The lowest voltage cell will be a damaged one  it is the exact way to find the lower battery among bank connected batteries
• Battery test and analyzing  PC Monitoring for all working process  In order to see the depth of the data output voltage and current you can install the SW and connect to your PC through USB port You can see all detailed discharge test processing data through monitor or print out